01 Product Overview
Smart BMS Monitoring & Control Functions for Wheeled LiFePO4 Energy Storage Battery
• Features:
• Cell Voltage Monitoring: 16-point cell voltage sampling, detection deviation within ±20mV.
• Multi-Point Temperature Detection: Equipped with 4 cell temperature sensors, 1 ambient temperature sensor and 1 MOS temperature sensor; temperature error ≤±2°C.
• Capacity & Cycle Recording: Actual capacity calibrated via full charge-discharge test. SOC estimation accuracy within 5%. Charge/discharge cycle statistics are configurable.
• Intelligent Cell Balancing: Adjustable charging & standby balancing modes to prolong LiFePO4 service life.
• Communication Function: Supports monitoring, operation control and parameter configuration via PC or local terminal, realizing remote telemetry, signaling and adjustment. Communication protocol meets YD/T 1363.3 standard and supports cascade connection.
It has hidden casters for easy moving, front LCD screen, neat rear ports, compact floor cabinet, simple installation with reserved heat dissipation space.
02 Detailed Parameters
○ Outline Dimensions & Interface Diagram
○ Battery Performance Parameters
|
Battery Configuration |
1P16 |
Nominal Voltage |
51.2V |
|
Operating Voltage Range |
43.2V~58.4V |
Nominal Capacity |
314Ah |
|
Nominal Energy |
16.0768KWh |
Standard Charge/Discharge Current |
100A@25±2℃ |
|
Maximum Charge Current |
200A@25±2℃ |
Maximum Discharge Current |
200A @25±2℃ |
|
Operating Ambient Temperature |
0～40℃ (Charge) -20～40℃(Discharge) |
Storage Temperature, Humidity |
-10℃ to 35℃ (within one month of storage)25 ± 2℃ (within three months of storage)65% ± 10% RHCondensation free |
|
Dimensions (L x W x H) |
890.5×420×267mm |
cycle life |
8000 cycles @25°C, 100A charge/discharge current, 7 0% DOD |
|
IP grade |
IP 20 |
Communication mode |
CAN&RS485 |
|
Humidity(%) |
5~75% |
Altitude |
0-3000m |
○ Battery Protection Parameters
○ Matching Inverter Communication
Correspond the communication interface definition of each inverter to the BMS communication interface;
For special inverters whose communication port definition is inconsistent with the BMS communication port definition,
you need to make your own network cable. Using a conventional network cable may cause phenomena
such as the BMS automatically turning on or being unable to shut down; Generally,
using a conventional network cable is sufficient for communication.
○ Internal Communication
Select the corresponding port for BMS internal communication, baud rate select 19200.
○ Basic Operating Modes
When the BMS detects that a charger is connected and the external charging voltage is more than
0.5V higher than the internal battery voltage, it turns on the charge MOSFET to start charging. When the
charging current reaches the valid charge current, it enters charge mode. In charge mode, both charge
and discharge MOSFETs are closed.
When the BMS detects that a load is connected and the discharge current reaches the valid discharge
current, it enters discharge mode.
If neither of the above two modes is met, it enters standby mode
The BMS enters shutdown mode under the following conditions: normal standby for 48 hours,
battery triggers undervoltage protection, executing button shutdown, or external switch shutdown.
Shutdown mode wake-up conditions: 1. Charge activation; 2. 48V voltage activation; 3. Button power-on.
03 Core Advantages
This wheeled floor storage battery boasts easy mobile installation,
expandable high-capacity long-cycle design, multi-channel intelligent monitoring and full-layer comprehensive safety protection.
Flexible Movable Floor Design
Hidden casters for easy relocation; front LCD screen & neat rear ports enable simple operation and installation.
Long Service Life & Large Expandable Capacity
16S1P LFP cells deliver 8000 cycles; up to 16 units parallel for scalable energy storage.
Dual Communication & Intelligent Monitoring
CAN, RS485 and Bluetooth supported; stores 500 fault logs to track real-time battery status.
Comprehensive Multi-Layer Safety Protection
Full overvoltage, overcurrent, temperature and short-circuit protection with pre-charge & active balancing.
04 Global Certification & Customization
Supported by seasoned global supply chain systems and complete port logistics networks, bespoke
products enjoy swift worldwide delivery, assuring efficient progress for every cooperation deal.
Global Service & Tailored Custom Options
Customizable Items: TENZ ENERGY offers OEM tailor services covering housing styling, personalized brand logos, as well as modifiable CAN and RS485 dual communication specs to align with technical requirements of different territories. The output port layout follows fixed standard designs and cannot be altered on request. Cooperation Modes: We welcome worldwide distributors, bulk dealers and solar engineering contractors to collaborate. Sample orders, large-volume bulk supply and region-exclusive parameter tuning solutions are all available to satisfy various overseas market requirements.
05 Application Scenarios
Home Photovoltaic System
TENZ ENERGY wheeled mobile battery works for outdoor solar backup power supplies. It reserves surplus PV power to deliver peak load balance and lower home power spending, supporting max 16 units parallel via CAN/RS485 communication.
Home Power Outage Emergency Backup
Reliable blackout power supply for lights, fridges, routers and water pumps. Equipped with top-brand smart BMS with full overvoltage/overcurrent/short-circuit protection to secure daily life & home security devices.
Daily Power for Apartments, Villas & Rural Houses
Space-saving vertical wall design with low noise operation. Built-in LCD & LED indicators show real-time cell voltage, temperature and SOC for easy daily maintenance, ideal for flats, villas and countryside homes.
Why Choose Tenz energy?
Green Intelligence · Creating a Zero-Carbon Future
Our Commitment:
We keep advancing our technology to manufacture reliable, long-cycle and high-performance energy storage products.
Perfect for household solar energy storage, emergency power supply and light commercial operation,
TENZ ENERGY provides trustworthy power solutions to maintain your regular power consumption.
Rich Industry Experience & R&D Capability
High-standard R&D laboratory, equipped with professional testing equipment
to ensure industry-leading performance and safety for our batteries.
Full-Process Closed-Loop Quality Control
Every manufacturing procedure, from cell grading to aging testing, records live operational data. This achieves complete traceability of the whole production flow and enables precise accountability for all quality issues.
We adopt closed-loop engineering revision control covering PR, ECR and ECN processes. Every energy storage battery pack is traceable back to its original cell batches and full factory inspection archives.
Authoritative Global Export Certifications
Core Benefits of Cooperation
Professional Integrated Manufacturer Providing Lithium Energy Storage Batteries for Global Household and Small Commercial Scenarios
High Adaptability
5.12kWh standard energy storage batteries are readily available, with flexible ODM customization support and compatibility with globally popular residential solar inverters.
Compliance & Peace Of Mind
All our battery products come with complete UN38.3 and MSDS lithium cell credentials, allowing smooth international transport, customs clearance and global sales without extra troubles.
FAQ
1.Is this battery compatible with household solar inverters?
Absolutely. This storage device is fitted with premium smart BMS, delivering outstanding adaptability to widely used solar inverters. It works seamlessly with residential small PV energy storage setups.
02. Do you accept sample test orders?
We accept trial sample orders. Please forward your full technical requirements to our sales department, and we'll calculate a precise quote promptly.
03. Can we customize the shell color and brand logo?
We provide comprehensive OEM tailor-made solutions, such as custom shell color tones, exclusive brand logo printing, along with personalized user guides and outer package designs.
04.How many days will bulk goods take to deliver?
Automated mass production equipment keeps our weekly output stable. We start production promptly once your deposit is verified, so we can deliver all goods on schedule.
Get in Touch With Us
We are excited to get to work with you. Please do not hesitate to contact us with any queries.
WhatsApp/Mobile: +8613713871157
Mail: kryssica.wu@tenzenergy.com
Website: www.tenzenergy.com
Shenzhen Tianchi Zhichuang Tech Co, Ltd.
Guangdong Tianchi New Energy Technology Co.,Ltd.
Hot Tags: 16kwh wheeled mobile lifepo4 off-grid residential solar energy storage battery odm factory direct supply, China 16kwh wheeled mobile lifepo4 off-grid residential solar energy storage battery odm factory direct supply manufacturers, suppliers, factory