Your Professional Mobility Scooter Battery Supplier
Guangdong Tianchi New Energy Technology Co., Ltd. (TCRFD) is a professional lithium-ion battery manufacturer based in Dongguan, China. We specialize in e-bike batteries, household energy storage systems, and customized lithium battery packs for AGV, golf carts, forklifts, and smart devices.
Strong Battery Manufacturing Experience
Our management team has over 15 years of industry experience with stable production and professional battery pack development capability.
Flexible OEM & Custom Solutions
We support customized battery packs, voltage, capacity, housing, and connector options for different industrial and energy storage applications.
Mature E-bike Battery Supply
We supply batteries for multiple e-bike brands and shipped over 1 million e-bike batteries in 2024.
Global After-sales Support
Local after-sales partners in Europe and the U.S. help provide faster technical support and customer service for overseas clients.
Specification
|
Nominal Voltage |
24V, 36V, 48V |
|
Standard Capacities |
15Ah / 17Ah / 20Ah |
|
Nominal Energy (Wh) |
~720Wh / ~816Wh / ~960Wh |
|
Chemistry |
NCM (Li-ion) |
|
Charge Voltage |
54.6V |
|
Protection |
Integrated BMS |
|
Communication |
Customer designed |
Advantages of Mobility Scooter Battery
Up to 3X More Usable Power
Compared to traditional lead-acid batteries, you can use nearly 100% of the battery’s capacity—meaning more mileage and less worry.
01
Lasts Up to 10X Longer
While SLA and AGM batteries may need replacement every 1–2 years, lithium batteries can last over a decade with proper use.
02
Lightweight and Easy to Handle
Our lithium batteries weigh about half as much as traditional options, making them easier to lift, install, and transport.
03
Reliable in All Seasons
LiFePO₄ batteries are engineered to operate even in extreme temperatures—performing reliably down to -4°F (-20°C).
04
More Range, Fewer Batteries
Thanks to the flat voltage curve of lithium iron phosphate chemistry, you get full power until the very end of the charge.
05
Steps for Replacing Mobility Scooter Battery
Safety First
Before beginning, ensure the scooter is turned off and positioned on a flat, stable surface. Remove the keys to prevent accidental activation.
Access the Battery Compartment
Open the scooter’s battery compartment, which is typically located under the seat or behind a removable panel.
Disconnect the Old Battery
Carefully disconnect the battery terminals, starting with the negative (-) cable to prevent any short circuits. Handle with care to avoid damaging the cables and connectors.
Remove the Old Battery
Take out the old battery, being mindful of its weight and any potential spillage if you’re dealing with non-sealed batteries.
Install the New Battery
Place the new battery in the compartment, ensuring it fits securely. Connect the battery terminals, starting with the positive (+) cable this time.
Test the Scooter
Once everything is connected, turn on the scooter and check all functions to ensure the new battery is functioning properly.
● Fully charge your batteries before using them for the first time. Not doing so could limit the recharging capacity in the future.
● Use the equipment manufacturer’s charger for all routine charging or an appropriate charger designed for mobility devices.
● Never use an automotive trickle type or wet type charger on Sealed Gel or AGM batteries as doing so will damage your batteries.
● Charge your battery for as long and as often as possible.
● Charge your battery fully every day, even after a short trip.
● Charging your battery overnight is fine - you cannot overcharge the battery.
● Your battery will reach full capacity after charging 10 - 20 cycles (particularly noticeable for SLA batteries)
● Try to allow a complete full charging cycle of 12 hours once a week.
● For optimum results charge your batteries in conditions under 10 degrees or over 30 degrees.
● Always charge in a well-ventilated area away from heat sources or open flames.
● Do not leave your batteries in a discharged state for more than 24 hours.
Electrical Interface Customization: Connector type, pinout, cable length, fuse strategy, and service disconnect design
BMS Configuration: Protection thresholds, current limits, temperature derating, recovery logic, balancing strategy
Customer-designed Communication Protocol: SOC/SOH reporting, fault code mapping, event logging, wake/sleep behavior (as required)
Documentation And Traceability: Revision control, serial/batch tracking, labeling formats aligned to importer/distributor processes
Private Label Supply: Branding, carton labeling, and SKU mapping for wholesalers
Packaging and Shipping
|
Packaging |
Inner Packaging: Shock-absorbing foam Outer Packaging: Corrugated cardboard box, wooden crate |
|
Shipping |
Shipping by sea, by air, by express are acceptable. According to your requirements. |
Our Factory
(Short for TCRFD) was established in 2018, based in Dongguan City, China. TCRFD currently has about 50 management personnel, skilled workers between 150 and 200, and consumes around 3M cells every month.
Our Certificates
FAQ
We are one of the most reliable mobility scooter battery manufacturers and suppliers in China, specialized in providing high quality customized service. Please feel free to wholesale bulk high-grade mobility scooter battery for sale here from our factory.
3 wheels electric scooter, scooter for elderly disabled people, 4 wheel scooter for seniors