16kWh LiFePO4 Battery for Reliable Backup Systems

For solar brands, distributors, and installers, choosing the right battery is an important part of building a dependable solar back up power solution. The product needs sufficient storage capacity, clear electrical limits, effective battery protection, and reliable integration with a compatible inverter.
The Tenz Energy MASON 280L (3.0) is a 51.2V LiFePO4 battery with 16kWh of rated energy. It provides a substantial storage option for residential backup systems and other compatible energy storage applications.
How Does a Solar Battery Provide Backup Power?
A solar backup system typically combines solar panels, a compatible hybrid inverter, a battery, and designated electrical loads.
During normal operation, solar energy can supply household consumption and charge the battery when surplus generation is available. When solar production decreases, stored energy can be used to support connected loads through the inverter.
If the grid fails, a compatible inverter with backup functionality can disconnect the designated backup circuits from the grid and continue supplying them from the available battery energy. Whether solar panels can continue charging the battery during an outage depends on the inverter's design and configuration.
The battery is therefore one part of the backup solution. The inverter, electrical protection, and backup-load arrangement determine how the complete system operates.

MASON 280L (3.0): Product Specifications
| Specification | MASON 280L (3.0) |
|---|---|
| Battery chemistry | LiFePO4 |
| Rated energy | 16kWh |
| Nominal voltage | 51.2V |
| Nominal capacity | 314Ah |
| Configuration | 1P16S |
| Working voltage | 42–58.4V |
| Rated charge/discharge current | 100A at 25 ± 2°C |
| Maximum charge current | 200A at 25 ± 2°C |
| Maximum discharge current | 200A at 25 ± 2°C |
| Communication | CAN / RS485 |
| Dimensions | 817 × 412 × 267mm |
| Weight | 113kg ± 3kg |
| Charging temperature | 0–40°C |
| Discharging temperature | -20–40°C |
| Enclosure rating | IP20 |
| Parallel connection | Up to 16 packs |
The specified cycle life is 6,000 cycles at 25°C, with a 100A charge and discharge current and 80% depth of discharge. This figure is based on the stated test conditions and should not be treated as a guaranteed result for every installation.

Flexible Storage Capacity for Different Backup Requirements
Not every household needs the same level of backup. Some customers want to maintain essential lighting, refrigeration, and communication equipment, while others may require a larger energy reserve for more extensive household loads.
The MASON 280L (3.0) supports up to 16 battery packs in parallel according to its specification. This gives distributors and system designers a defined way to develop larger storage configurations using the same battery model.
The final configuration should be checked against the inverter's supported battery capacity, current limits, communication requirements, and electrical protection design. Battery packs of different brands or models should not be mixed in the same parallel connection.
For brands offering several backup system packages, this expansion capability can help create different storage options without introducing multiple battery models.

Designed for Integration into Solar Backup Systems
The MASON 280L (3.0) provides CAN and RS485 communication interfaces for integration with compatible equipment.
Before ordering, buyers should confirm the inverter's supported communication protocol, connector pinout, voltage range, and battery configuration settings. A communication port alone does not guarantee compatibility with every inverter brand.
Physical installation also needs attention. The battery weighs approximately 113kg and has an IP20 enclosure rating. The supporting structure, handling arrangements, and indoor installation location must be assessed before installation. It should not be treated as a weatherproof outdoor battery.
These details matter to distributors and installers because a backup system needs to be suitable not only on paper, but also for the actual property and installation environment.
For a solar brand or distributor, the battery supplier affects more than the initial product purchase. Consistent product information, manufacturing support, and cooperation on future orders all matter when building a long-term product range.
Tenz Energy focuses on battery research, development, manufacturing, and sales, with product lines covering residential energy storage, commercial and industrial energy storage, and light electric vehicle batteries.
For B2B customers developing solar back up power products, Tenz Energy offers:
Battery manufacturing experience: A product range covering different battery applications and storage requirements.
Documented technical parameters: Electrical limits, communication interfaces, protection functions, and installation information to support product evaluation.
OEM and ODM cooperation: Support for brands and distributors developing battery products for their target markets.
Application-focused product selection: Opportunities to discuss battery capacity, system requirements, and project-specific configurations before ordering.
A suitable supplier should be able to discuss both the battery itself and the practical requirements of integrating it into a backup power product.

Build Your Solar Back Up Power Product Range with Tenz Energy
The MASON 280L (3.0) offers 16kWh of rated energy, a 51.2V LiFePO4 platform, integrated battery protection, and parallel expansion capability. It is an option for solar brands and system integrators developing residential backup solutions with compatible inverter equipment.
If you are sourcing a 16kWh battery for your solar backup range, share your target inverter model, backup load requirements, and expected order quantity with Tenz Energy. The technical team can help assess product suitability and discuss OEM or ODM cooperation.
Visit Tenz Energy to explore its battery manufacturing and energy storage solutions.
FAQ

1. Can the MASON 280L (3.0) provide backup power during a grid outage?
2. How much energy does this solar backup battery store?
3. How long can a 16kWh battery provide backup power?
4. Can this battery support air conditioners and other high-power appliances?
5. Can multiple MASON 280L (3.0) batteries be connected together?
6. What BMS functions does the battery provide?
Hot Tags: solar back up power, China solar back up power manufacturers, suppliers, factory, lifepo4 rc battery pack, new battery storage, photovoltaic battery storage, power storage battery, ups energy storage, Wall mounted Lifepo4 Energy Storage Battery Pack





