Name: China 16KWh Mobility Wheeled Handle Outdoor Energy Storage Factory In China Manufacturers Suppliers Factory - Tianchi
Brand: Tianchi
SKU: 311210103

01 Product Overview

MASON 280L-O - 51.2V 314AH-16KWh

• Functions:

■ Communication interface:PC or intelligent front-end can monitor battery data,control operation and set parameters through telemetry,remote signaling,remote adjustment,remote control and other commands.The communication protocol meets the requirements of YD/T 1363.3 and realizes cascade communication.

■ Historical data recording,saving and reading:when the battery is

abnormal,record and save real-time battery status and alarm information.At present, up to 500 historical fault data can be stored.

■ Battery management system parameter setting:battery management

system parameters,including cell battery over voltage/under

voltage,battery total voltage over voltage/under voltage,charge and

discharge over current,battery high/low temperature,battery capacity,working mode,charge and discharge limit current, can be set in

the battery monitoring system.

■ Working mode: charging and discharging current limiting, constant voltage output, direct output and other working modes can be set in the

monitoring system.

■ Multiple protection functions:hardware protection,battery protection, high and low temperature protection, output short circuit protection, etc.

02 Detailed Parameters

○ Multi-Tier Safety Safeguards via Intelligent BMS

Rated energy(kWh)	16KWh	Configuration	1P16S
Nominal Voltage(V)	51.2V	Working Voltage(V)	41.6V~57.6V
Nominal Capacity(Ah)	314Ah	Rated charge/discharge Current(A)	100A@25± 2℃
Maximum charging current	200A@25± 2℃	Working Temperature	0～40℃(Charge) -20～40℃(Discharge)
Weight(Kg)	116kg± 3kg	Dimension(mm)	893×444×278mm
Storage temperature and humidity	-10℃~35℃ (Within one month of storage) 25±2℃ (Within three months of storage) 65%±20% RH	cycle life	8000 cycles @25C 100A charge and discharge current 80% DOD
IP grade	IP10	Communication mode	CAN&RS485
Humidity(%)	5~80%	Altitude Limited(m)	0-3000m

○ Visual & Interface

product-1226-768

○ Pack over voltage parameters

product-1214-1120

○ Pack low voltage parameters

product-1230-618

○ Cell high/low temperature(charging) parameters

product-1222-1088

○ The difference between active and passive balancing

Passive balancing

The battery with higher voltage is discharged by means of resistance discharge, releasing electricity in the form of heat. The advantages are low cost and simple circuit design; the disadvantages are that the balancing is based on the lowest battery residual amount, which cannot increase the capacity of the battery with less residual amount, and 100% of the balancing electricity is wasted in the form of heat. If the balancing current is small, the efficiency of the electricity balancing effect in a large-capacity battery pack with large electricity differences is very low, and it takes a long time to achieve balance, which feels like scratching an itch in the application.

Active balancing

Balancing is done by transferring electricity, which is highly efficient and has low losses. Regardless of whether the battery is charging, discharging, or static, as long as the voltage difference is greater than the set value, balancing will begin. Therefore, as long as there is a voltage difference, active balancing should be done 24 hours a day until the voltage difference is less than the set range. Since active balancing is not limited by charging time, the balancing time is longer and the balancing current is larger, so it is more suitable for use in large-capacity battery packs.

○ Active balance boar - Installation method

product-674-652

○ Cable Assembly

product-990-1058

○ Safety precautions

Do not place the battery on flammable building materials.

Recommended to place the battery in the cabinet .

The temperature should be between 10℃and 30 ℃ to maintain the best operating state .

The installation site should be some free space around the battery to dissipate heat

(as shown in the figure below), which is suitable for installation on the concrete surface or other non-flammable surfaces.

product-912-712

○Unboxing steps

1) Open carton

2) Take out the pearl cotton

3) Unfold carton

4) Stand out product,extension rod

product-1348-302

03 Core Advantages

This MASON 280L-O 51.2V 14.336kWh LiFePO4 battery adopts luggage-style movable wheeled design,

16S1P Grade-A cells with high-power active balance delivering up to 8000 cycles at 80% DOD, full multi-layer hardware protection,

CAN&RS485 dual communication supporting Bluetooth monitoring and max 16-unit parallel connection,

multiple working modes with clear LED indication, fully pre-assembled compatible with mainstream inverters,

and wide temperature working range for stable long-term energy storage use.

Dual Communication & Expandable Parallel Connection

Standard CAN (500kbps) & RS485 (19200bps) dual communication, supporting Bluetooth local debugging and PC remote monitoring with storage of up to 500 fault logs. Max 16 units can be paralleled; mixing different battery models in parallel is prohibited.

Multiple Working Modes & Clear LED Indication

Four working modes available: charging, discharging, standby and power-off sleep, with maximum 48-hour standby time. Equipped with green running LED, red alarm LED and 4-segment SOC indicators, different flashing modes clearly reflect battery SOC and all fault statuses.

All-In-One Integrated Unit with Customization Support

Pre-installed cooling fan, air switch, ground terminal and communication ports for direct wiring after unpacking, compatible with mainstream hybrid inverters. Complete UN38.3 & IEC certificates are provided, supporting bulk OEM & ODM customization services.

Wide Operating Environment & Standard Packaging

Charging temperature range: 0~40℃, discharging range: -20~40℃, applicable altitude 0~3000m, working humidity 5%~80%. Adopts dust-proof & moisture-proof carton packaging, carton size 99.5×52.5×37cm, gross weight 118kg per set, enough heat dissipation space required during installation.

04 Global Certification & Customization

Supported by seasoned global supply chain systems and complete port logistics networks, bespoke

products enjoy swift worldwide delivery, assuring efficient progress for every cooperation deal.

Global Service & Tailored Custom Options

Customizable Items: TENZ ENERGY offers OEM tailor services covering housing styling, personalized brand logos, as well as modifiable CAN and RS485 dual communication specs to align with technical requirements of different territories. The output port layout follows fixed standard designs and cannot be altered on request. Cooperation Modes: We welcome worldwide distributors, bulk dealers and solar engineering contractors to collaborate. Sample orders, large-volume bulk supply and region-exclusive parameter tuning solutions are all available to satisfy various overseas market requirements.

05 Application Scenarios

Residential Off-Grid Home Energy Storage

This 14.336kWh wheeled LiFePO4 battery with telescopic pull rod perfectly fits standalone off-grid households without wall drilling. Equipped with 16S1P Grade-A 280Ah cells and high-power active balancing, it delivers steady power supply with up to 8000 cycles at 80% DOD. It supports up to 16 units parallel expansion, built-in full overvoltage, undervoltage and temperature protection, plus CAN/RS485 & Bluetooth monitoring, offering reliable all-day backup power for household lighting, air conditioners and daily appliances.

Small Commercial Shop & Retail Backup Power

Suitable for convenience stores, offices and small retail shops, this all-in-one floor-standing energy storage pack features plug-and-play integrated structure with pre-installed fans and switches, compatible with mainstream hybrid inverters. The wide working temperature range (0~40℃ charging, -20~40℃ discharging) adapts various indoor environments, while real-time LED status indicators and 500 storable fault logs simplify daily maintenance to avoid power loss during peak hours or blackouts.

Mobile Temporary Outdoor Power Supply

Thanks to the silent universal casters and portable luggage-style design, the battery can be easily moved for construction sites, outdoor stalls and temporary event power demands without fixed installation. With max 200A charge/discharge peak current and short-circuit hardware lock protection, it ensures safe stable output for temporary electrical equipment, and standardized dust-proof moisture-proof carton packaging facilitates transportation and on-site deployment.

Why Choose Tenz energy?

Green Intelligence · Creating a Zero-Carbon Future

Our Commitment:

We keep advancing our technology to manufacture reliable, long-cycle and high-performance energy storage products.

Perfect for household solar energy storage, emergency power supply and light commercial operation,

TENZ ENERGY provides trustworthy power solutions to maintain your regular power consumption.

Rich Industry Experience & R&D Capability

High-standard R&D laboratory, equipped with professional testing equipment

to ensure industry-leading performance and safety for our batteries.

Expert R&D Team

20+ Years in Li-battery Industry

Digital PLM R&D System

Full-Process Closed-Loop Quality Control

· Real-time recording of data for all procedures

Every manufacturing procedure, from cell grading to aging testing, records live operational data. This achieves complete traceability of the whole production flow and enables precise accountability for all quality issues.

· Full Lifecycle Traceable Management

We adopt closed-loop engineering revision control covering PR, ECR and ECN processes. Every energy storage battery pack is traceable back to its original cell batches and full factory inspection archives.

Authoritative Global Export Certifications

product-1246-334

product-1244-334

Core Benefits of Cooperation

Professional Integrated Manufacturer Providing Lithium Energy Storage Batteries for Global Household and Small Commercial Scenarios

High Adaptability

5.12kWh standard energy storage batteries are readily available, with flexible ODM customization support and compatibility with globally popular residential solar inverters.

Compliance & Peace Of Mind

All our battery products come with complete UN38.3 and MSDS lithium cell credentials, allowing smooth international transport, customs clearance and global sales without extra troubles.

FAQ

1.Is this battery compatible with household solar inverters?

Absolutely. This storage device is fitted with premium smart BMS, delivering outstanding adaptability to widely used solar inverters. It works seamlessly with residential small PV energy storage setups.

02. Do you accept sample test orders?

We accept trial sample orders. Please forward your full technical requirements to our sales department, and we'll calculate a precise quote promptly.

03. Can we customize the shell color and brand logo?

We provide comprehensive OEM tailor-made solutions, such as custom shell color tones, exclusive brand logo printing, along with personalized user guides and outer package designs.

04.How many days will bulk goods take to deliver?

Automated mass production equipment keeps our weekly output stable. We start production promptly once your deposit is verified, so we can deliver all goods on schedule.

Get in Touch With Us

We are excited to get to work with you. Please do not hesitate to contact us with any queries.

WhatsApp/Mobile: +8618975983437

Mail: Leeana.long@tenzenergy.com

Website: www.tenzenergy.com

Guangdong Tianchi New Energy Technology Co.,Ltd.

Send Inquiry Now

Hot Tags: 16KWh Mobility Wheeled Handle Outdoor Energy Storage Factory In China, China 16KWh Mobility Wheeled Handle Outdoor Energy Storage Factory In China manufacturers, suppliers, factory