01 Product Overview
• High Cycle‑life Performance, High Current Output and Efficient Active Cell Balancing:Rated for 8000 cycles under 80% DOD at 25℃, the unit supports 100A standard charge‑discharge current with peak 200A charge and discharge capability, handling higher load demands for business premises and large household solar setups. Its built‑in active balance board transfers energy between individual cells instead of wasting power via heat‑generating passive balancing. Balancing runs across charging, discharging and standby status, minimising cell voltage deviation over long‑term operation and cutting premature capacity drop for parallel battery banks.
02 Key Specifications
|
Specification |
Value |
|
Rated Energy |
32 kWh |
|
Configuration |
2P16S |
|
Nominal Voltage |
51.2 V |
|
Working Voltage |
41.6–57.6 V |
|
Nominal Capacity |
628 AH |
|
Rated Charge/Discharge Current |
100 A @ 25 ± 2°C |
|
Maximum Charging Current |
200 A @ 25 ± 2°C |
|
Working Temperature |
0–40°C (Charge); -20–40°C (Discharge) |
|
Weight |
240 kg ± 3 kg |
|
Dimensions |
416 × 560 × 910 mm |
|
Storage Temperature & Humidity |
-10°C to 35°C (within one month); 25 ± 2°C (within three months); 65% ± 20% RH |
|
Cycle Life |
8,000 cycles @ 25C, 100A charge and discharge current, 80% DOD |
|
IP Grade |
IP10 |
|
Communication |
CAN & RS485 |
|
Humidity |
5–80% |
|
Altitude Limit |
0–3000 m |
○ Appearance and interface
○ Capacity Scalability, Inverter Compatibility and Local Monitoring & Fault Logging
Up to 16 packs can be connected in parallel to scale total system capacity according to growing project energy requirements.
CAN and RS485 dual communication interfaces ensure smooth data exchange with mainstream solar hybrid and off‑grid inverters. Local LCD panel plus LED status indicators let field technicians read cell voltage, temperature and SOC directly onsite.
Bluetooth access allows quick parameter check and status review without extra test tools.
The system saves maximum 500 historical fault records, greatly speeding up fault location and troubleshooting during commissioning or later site maintenance.
○ Working mode
Wide Temperature Range & Thermal Monitoring
Multi‑level Safety & Pre‑charge Protection
Auto Sleep and Multiple Wake‑up Solutions
Convenient Structure for Site Installation
○ Project Application, Factory QC and Technical Service for Solar Partners
Suitable for large villa self‑consumption, grid failure backup power, small shop, office and light commercial solar storage projects. We conduct full‑range pack‑level validation including cell screening, BMS assembly, functional testing and ageing cycle before shipment. Every finished battery pack supports full batch traceability back to raw cell batches and complete factory inspection archives. For global solar distributors, system integrators and installation partners, we provide full sets of technical documentation and export‑required files. Our engineering team can offer pre‑sales project assessment and wiring suggestions to reduce common on‑site configuration errors.
OEM / Customization
OEM support is available for overseas distributors, bulk dealers and solar engineering contractors.
Based on the source page, customization options include:
- Housing styling
- Brand logo
- CAN and RS485 communication specifications
- Personalized user guides
- Outer packaging design
Manufacturing & Quality Information
The source page states that the output port layout follows a fixed standard design
and cannot be changed on request. Sample orders and large-volume supply are available.
Manufacturing & Quality Information
Certifications & Transport Documents
FAQ
01.Is this battery compatible with household solar inverters?
Compatibility depends on the inverter voltage range and communication requirements. Please provide the inverter brand and model so that compatibility can be confirmed before ordering.
02. Do you accept sample test orders?
Yes. Trial sample orders are available. Please provide the required quantity, destination country and technical requirements so the suitable configuration and quotation can be confirmed.
03. Can we customize the shell color and brand logo?
Yes. OEM options include housing color, brand logo, user guides and outer packaging, subject to order quantity and project requirements.
04.Can multiple battery units be connected in parallel?
Yes. The source specification states support for up to 16 units in parallel through the specified communication and system configuration.
Get in Touch With Us
We are excited to get to work with you. Please do not hesitate to contact us with any queries.
WhatsApp/Mobile: +8618975983437
Mail: Leeana.long@tenzenergy.com
Website: www.tenzenergy.com
Guangdong Tianchi New Energy Technology Co.,Ltd.
Hot Tags: 51.2v 32kwh residential flywheel energy storage, China 51.2v 32kwh residential flywheel energy storage manufacturers, suppliers, factory