A 16kWh LiFePO4 Battery for Residential Installers

A product that creates too many technical questions can slow down quotations and make installation teams less efficient.
That is why installers need clear specifications, dependable battery management,
and a supplier that understands the requirements of residential energy storage projects.
What Makes a Domestic Battery Practical for Installers?
When adding a battery to a residential product range, installers need to consider more than the homeowner's requested storage capacity.
A clearly defined electrical configuration
The MASON 280L (3.0) uses a 51.2V nominal voltage and a 1P16S configuration. Its working voltage range is 42–58.4V, giving installers specific electrical parameters to compare with the inverter's battery input requirements.
The rated charge and discharge current is 100A, with a maximum of 200A under the specified test conditions. These figures help installers assess whether the battery is suitable for the intended system, subject to the inverter and installation design.
Battery management that supports fault diagnosis
The battery uses a SEPLOS Smart BMS. It monitors cell voltage and temperature, supports cell balancing, and provides protection against overvoltage, undervoltage, overcurrent, high and low temperature, and short circuits.
The BMS can retain up to 500 historical fault records. For installation and after-sales teams, this provides useful information when investigating battery operating issues.
A defined route for larger installations
The specification supports up to 16 battery packs connected in parallel. This gives installers a way to plan larger storage configurations using the same battery model, where the inverter and system design permit it.
The final number of packs must be confirmed against the complete system's electrical limits and installation requirements.

MASON 280L: Product Specifications
| Specification | MASON 280L (3.0) |
|---|---|
| Battery chemistry | LiFePO4 |
| Rated energy | 16kWh |
| Nominal voltage | 51.2V |
| Nominal capacity | 314Ah |
| Configuration | 1P16S |
| Working voltage | 42–58.4V |
| Rated charge/discharge current | 100A at 25 ± 2°C |
| Maximum charge current | 200A at 25 ± 2°C |
| Maximum discharge current | 200A at 25 ± 2°C |
| Communication | CAN / RS485 |
| Dimensions | 817 × 412 × 267mm |
| Weight | 113kg ± 3kg |
| Charging temperature | 0–40°C |
| Discharging temperature | -20–40°C |
| Enclosure rating | IP20 |
| Parallel connection | Up to 16 packs |
The specified cycle life is 6,000 cycles at 25°C, with a 100A charge and discharge current and 80% depth of discharge. Installers should use these conditions when presenting the figure to customers rather than treating it as a guaranteed result under every operating environment.

Installation Details That Should Be Checked Before Ordering
A residential battery must suit the actual installation location. For installers, checking the physical requirements before ordering can prevent avoidable changes on site.
Weight and mounting
The MASON 280L (3.0) weighs approximately 113kg and measures 817 × 412 × 267mm. Its specification recommends wall mounting, but the supporting wall, mounting structure, fixing method, and handling arrangements must be assessed for the actual property.
This is an important point when planning residential installations: the available wall space alone does not establish that a location is suitable.
Indoor installation
The battery has an IP20 enclosure rating. It should be installed in an appropriate indoor location, protected from direct exposure to weather and unsuitable environmental conditions.
Temperature requirements
The specified charging temperature is 0–40°C, while the discharging temperature is -20–40°C. The installation location and expected operating conditions should be checked against these limits.
Inverter communication
CAN and RS485 interfaces are provided. However, installers should confirm the inverter's communication protocol, pinout, and battery settings before committing to a system configuration. The presence of a communication port does not establish universal inverter compatibility.
What Installers Gain from Working with a Battery Manufacturer
For a residential installer or local energy storage brand, the supplier relationship matters beyond the first shipment. Product information and manufacturing cooperation can influence how efficiently a battery range is introduced and supported.
Tenz Energy focuses on battery development and manufacturing across residential energy storage, commercial and industrial energy storage, and light electric vehicle applications.
For B2B buyers, the MASON 280L (3.0) offers several concrete points to evaluate:
A defined residential storage model: 16kWh rated energy in a 51.2V battery configuration.
Documented BMS functions: Monitoring, balancing, protection, and historical fault records.
Communication interfaces: CAN and RS485 for integration with compatible equipment.
Parallel expansion: Up to 16 packs supported by the product specification.
OEM and ODM cooperation: Options for brands and distributors developing their own battery product offering.
Before placing a bulk order, installers should request the latest technical documentation and confirm inverter compatibility, installation arrangements, product configuration, and applicable commercial terms.

Is the MASON 280L (3.0) Right for Your Domestic Battery Storage Range?
This battery is worth evaluating if your residential projects require a 16kWh storage option, a 51.2V platform, BMS monitoring, and the possibility of parallel expansion.
It may not suit every property. The 113kg weight, IP20 enclosure, and inverter communication requirements need to be considered during project assessment.

Tenz Energy works with international distributors, installers, and brands on battery supply and OEM/ODM projects. Contact the team with your target market, inverter model, and expected order quantity to discuss product suitability and cooperation.
Visit Tenz Energy to learn more about its battery manufacturing capabilities and energy storage range.
FAQ

1. What capacity is the MASON 280L (3.0) domestic battery?
2. Can installers connect multiple MASON 280L batteries?
3. Is the MASON 280L compatible with all residential hybrid inverters?
4. Can this battery be installed outdoors?
5. What should installers consider when mounting this battery?
6. What BMS functions does the battery provide?
Hot Tags: domestic battery storage, China domestic battery storage manufacturers, suppliers, factory




