Products
18650 Cells Bulk
video
18650 Cells Bulk

18650 Cells Bulk

INR18650-30Q 18650 cell: 3.6V, 3000mAh, 15A continuous discharge. Specs, pack examples and bulk supply support from TENZ Energy.

 

1

Charging and Discharging the 30Q Cell

 

Charge the INR18650-30Q with a CC-CV profile up to 4.20V. Standard charge is 1.5A with charging terminated at 150mA. Rated charge is 4A with termination at 100mA. Charge only within the specified temperature range, and use a charger approved for your cell and pack design.

The 15A rating applies to the cell. In a finished pack, the allowable current also depends on cell spacing, busbars, wiring, BMS limits, and cooling, so test the pack under its real operating conditions.

 

2

Cycle Life and Storage

 

The Samsung specification defines a cycle test with 15A discharge. Under that procedure, the cell retains at least 1770mAh (about 59% of nominal capacity) after 250 cycles. Cycle life varies with discharge current, temperature, and cut-off voltage, so compare cycle data only under the same test conditions.

Storage performance depends on state of charge and storage temperature. Follow the storage conditions in the datasheet for your batch.

 

3

Applications of the INR18650-30Q

 

The 30Q is used in battery packs for:

  • Cordless power tools and portable electric equipment.
  • Portable power stations and compact battery systems.
  • E-bikes and light electric mobility battery packs.
  • Industrial and electronic equipment that uses rechargeable cylindrical cells.

Before design-in, confirm continuous and peak current, operating temperature, pack voltage, capacity, mechanical dimensions, and the transport and product-safety requirements for your market.

FAQ

 

 

DSC04363

01.Does the bare 30Q cell include a BMS or protection circuit?

No. The 30Q is a cell, not a finished battery. Pack-level protection must come from a suitable BMS and the pack design.

02.Can the 30Q be used in an e-bike or power tool battery pack?

Yes, for suitable designs. Check the equipment's continuous and peak current, voltage, operating temperature, runtime target, and available space. Cells in parallel share the load, so a 2P group has a theoretical 30A continuous limit before thermal and BMS limits apply.

03.How does the 30Q compare with other 18650 cells?

The 30Q favors capacity (3000mAh) while still supporting 15A continuous discharge. Cells rated for higher continuous current usually give up some capacity, so choose by your pack current and runtime targets.
modular-1
Request a Quote for INR18650-30Q Cells

Email:Vicky.w@tenzenergy.com    Web:www.tenzenergy.com

Hot Tags: 18650 cells bulk, China 18650 cells bulk manufacturers, suppliers, factory

Send Inquiry