76.8V 80Ah LiFePO4 Lithium Battery Pack for Electric Motorcycles
The TENZ 76.8V 80Ah battery pack stores 6,144Wh of lithium iron phosphate (LiFePO4) energy in a 24S4P block built for electric motorcycles. It supports up to 160A of continuous discharge, talks to your vehicle over CAN and RS485, and uses natural cooling, so there is no fan to maintain. We build it in Dongguan, China, and customize it for OEM and ODM projects.
Why Choose This Pack
Why Choose the 76.8V 80Ah LiFePO4 Motorcycle Battery
6,144Wh in a single pack
Eighty amp-hours at 76.8V nominal adds up to 6,144Wh. At 53.2 kg, that is roughly 115Wh/kg at pack level (approx.).
01
Built for high-current discharge
The standard discharge current is 80A, and the pack handles up to 160A continuously. At nominal voltage, 160A equals roughly 12kW of continuous output (approx.), a useful reference when you size a motor and controller.
02
LiFePO4 chemistry
Lithium iron phosphate cells are widely used in traction batteries because of their thermal stability and long cycle life. That makes them a practical choice for daily-use electric motorcycles.
03
Wide temperature window
The pack discharges from −20°C to 65°C and charges from 0°C to 55°C, so it can serve riders in cold and hot climates alike.
04
CAN and RS485 communication
Read battery data over CAN or RS485 and integrate it with your vehicle's control system.
05
product parameters
| Item | Technical parameter | Item | Technical parameter |
| Cell type | lithium iron phosphate battery | Standard discharge current | 80A |
| Storage ambient temperature | -20~45℃ |
Maximum continuous discharge current |
160A |
| Working temperature |
Charging：0~55℃ Discharging：-20～65℃ |
Peak discharge current (@time) |
200A |
| Relative humidity | ≤95% | Standard charge current | 15A |
| Working altitude requirements | ≤4000m |
Maximum continuous charge current |
30A |
| Nominal capacity | 80Ah | Cycle life | 1200times |
| Battery pack structure | 24S4P | Thermal management method | Natural cooling |
| Nominal voltage | 76.8V | IP rating | Battery box IP64 |
| Maximum charging voltage | 86.4V | Total system mass | 53.2 ±0.5kg |
| Operating voltage range | 60~86.4V | Battery Pack size | 295*295*376mm |
| SOC working range | 0~100% | Flammability rating | Plastic parts: UL94-V0 |
Pack Design, BMS and Enclosure
Pack Design, BMS and Enclosure
24S4P cell configuration
Four cells are paralleled into each of 24 series groups. The series count sets the 76.8V nominal voltage, and the parallel count brings capacity to 80Ah.
BMS protection
The battery management system guards against overcharge, over-discharge, overcurrent, short circuit and abnormal temperature. If your project has specific protection requirements, include them in your inquiry and we will review them against the BMS design.
CAN and RS485 interfaces
Both interfaces are available for battery data monitoring. Tell us which protocol your vehicle uses and we will check the match.
Metal enclosure rated IP64
IP64 means the case is dust-tight and protected against splashing water. It is not designed for immersion or pressure washing, so mount the pack in a sheltered position on the frame.
Natural cooling
The pack relies on natural cooling rather than fans or liquid loops, which keeps the design simple. Leave some air space around the case when you plan the installation.
Flame-retardant plastic parts
Plastic parts are rated UL 94 V-0.
Certification
-
How long does it take to charge?
At the standard 15A charge current, a full charge from empty takes roughly 5 to 6 hours (80Ah ÷ 15A ≈ 5.3 hours). At the 30A maximum continuous charge current it takes about half that. Actual time depends on your charger and the BMS.
-
How big and heavy is the pack?
295 × 295 × 376 mm and 53.2 ± 0.5 kg. Check the space, mounting points and connector positions on your vehicle before ordering.
Contact Us
Send your controller and charger specifications, connector type and the space available in the frame. Our engineers will check the fit and recommend the right configuration.
Our address
Room 502, Building 3, No. 7,Luoqunpu 1st Road, Qingxi, Dongguan, Guangdong, China
Phone Number
+8618779451943
Vicky.w@tenzenergy.com
Hot Tags: 76.8V lithium ion battery packs for electric vehicles, China 76.8V lithium ion battery packs for electric vehicles manufacturers, suppliers, factory