01 Product Overview
100kWh All‑In‑One LiFePO4 BESS With Grid‑Fail Emergency Backup For Bangladesh Textile Factory Solar‑Diesel Hybrid And EPC Project Bulk Supply
It serves as an integrated intelligent distributed solar PV & energy storage solution with the core advantages listed below:
1. High Safety Performance
Multi-dimensional electrical sensing + multi-layer circuit breaker protection for industrial storage safety. Integrated PV, energy storage, diesel generator and PCS devices with unified bus control, greatly boosting overall system stability.
2. Easy Installation & Wide Application
Compact all-in-one modular design, only 1.42㎡ floor occupation, vertical IP54 cabinet for commercial outdoor solar storage. Grid-friendly design fits all commercial power scenarios; neat front panel layout with cooling vents & fire buttons, tidy internal wiring & underfloor cable routing for easy field maintenance. Max 3 units parallel expandable with unified cabinet size.
3. Intelligent Operation & Long Battery Lifespan
Cloud management platform supports remote & local real-time monitoring and automatic intelligent operation. Free on-site maintenance service provided. Built-in cell active balancing & intelligent fault alarm system to keep consistent battery performance and extend LiFePO4 cycle life.
UltraPower 100 vertical IP54 C&I energy storage cabinet covers merely 1.42㎡ floor area. Front panel integrates control screen, cooling vents and fire control buttons. Neatly arranged internal modules and standardized wiring simplify inspection. Uniform cabinet size enables up to 3 units parallel expansion. Bottom cable routing delivers clean outdoor layout and convenient daily maintenance for commercial solar storage projects.►
02 Detailed Parameters
○ PV parameter
|
Maximum input power |
50kW |
Starting voltage |
200V |
|
Photovoltaic maximum voltage |
1000Vdc |
Photovoltaic rated voltage |
630Vdc |
|
MPPT operating voltage range |
200-850Vdc |
MPPT quantity |
4 |
|
Number ofsingle MPPT input channels |
2 |
Maximum input current(Each MPPT) |
30A*4 |
○ Energy storage parameter
|
Nominal energy |
103kWh |
Nominal voltage |
690Vdc |
|
Battery voltage range |
605~777 Vdc |
Rated charge/discharge current |
75A |
○ Ac output parameter
|
Rated output power |
50kW |
Maximum output current |
75A |
|
Rated voltage (input and output) |
3L/N/PE;400V |
Off-grid switching time |
<20ms |
|
Grid frequency |
50Hz/60Hz |
Voltage total harmonic distortion |
4 |
|
Number ofsingle MPPT input channels |
2 |
Maximum input current(Each MPPT) |
<3%@Rated power&Linear load |
○ Appearance and interface
○ Electrical primary diagram
○ Diagram
The following figure represents the UltraPower 100 all in one system.
The case legend will not be described again.
○ BMS - Battery Management System
The BMS system of this product adopts a dual-level architecture, primarily designed for real-time monitoring of the battery pack.
It can detect individual cell voltage, total voltage, current,temperature, etc.,
making real-time judgments about the battery's operational status. It uploads battery pack status information
and alarm messages, and when necessary, cuts off the battery pack circuit output for protection
○ EMS - Energy Management System
The Energy Management System (EMS) is the energy dispatching and management center of the PV storage system.
Through real-time communication with the BMS (Battery Management System),PV storage inverter,circuit energy meter,manageable load devices,and peripheral devices (air conditioning,fire protection)it collects critical data from all communication substations.
Through data collection,processing,analysis,internal program logic operation,it controls the orderly and robust operation of the ESS.
The EMS used in this product possesses powerful data processing capabilities, is compatible with multiple communication protocols,
can quickly interface with BMS and PCS available on the market,and supports remote servicing.The specific parameters are shown in the table below.
03 Core Advantages
This integrated PV and energy storage cabinet integrates compact structure, all-round safety protection,
multi-scene power supply modes and intelligent management.
With flexible parallel capacity expansion and good compatibility with solar panels and diesel generators,
it delivers economical, stable peak shaving and backup power solutions for all kinds of commercial and industrial projects.
- Compact Integrated Layout
All battery modules, 50kW hybrid inverter, BMS, EMS, fire suppression and intelligent cooling are integrated into one vertical cabinet. It only occupies 1.42㎡ floor space with IP54 enclosure. Factory pre-assembly cuts transportation, installation and commissioning costs by 15%, and up to 3 units can be paralleled to expand power from 50kW to 300kW.
- Multi-layer Comprehensive Safety Protection
It adopts early thermal runaway warning, cabin-level perfluorohexanone fire suppression, gas & smoke detection and multi-stage circuit breakers. Intelligent constant temperature control keeps internal temperature difference ≤5℃ to extend battery cycle life by 12℃. The cabinet supports -20℃~50℃ operation and 3000m altitude with IP54 dust & water resistance.
- Full-scene Multi-mode Operation
Compatible with PV, mains and diesel generators, supporting grid-tied, off-grid and VPP modes. Off-grid switching time is less than 20ms for uninterrupted power. Equipped with four independent MPPT channels up to 1000V PV input, matching industrial rooftop PV and backup power demands.
- Intelligent Remote O&M & Modular Design
Equipped with 4G, Ethernet and RS485 communication for cloud remote monitoring. Built-in intelligent cell balancing and automatic fault alarms. Standardized battery packs support independent replacement without full system shutdown, lowering maintenance difficulty.
04 Global Certification & Customization
- TENZ Energy is a trusted manufacturer of integrated PV energy storage cabinets for global C&I energy storage projects. Our 50kW/103.68kWh all-in-one energy storage cabinet complies with international electrical & environmental standards. Featuring IP54 protection, -20℃~50℃ wide temperature range and stable operation at altitudes up to 3000m, it suits outdoor deployment in India, the Middle East and other overseas markets. We offer technical support for regional certifications such as BIS, ESMA and local grid connection standards.
- Flexible OEM customization is supported: system capacity, parallel quantity, PV MPPT, diesel generator interface and anti-reflux control can be adjusted freely. We can customize fire suppression systems, communication modules (4G/Ethernet/RS485), cabinet wiring and EMS management strategies. The unit supports grid-tied, off-grid, microgrid and VPP modes, ideal for commercial & industrial backup power, peak load shifting and standalone power supply systems globally.
05 Application Scenarios
Our latest projects
Shanghai Jwell machinery Workshop co-operation projects
1. Factory Peak Shaving & Power Backup
Ideal for manufacturing plants with frequent blackouts and high peak electricity bills. It matches rooftop PV and diesel generators, delivers seamless <20ms off-grid switch, cuts power costs and avoids production shutdowns. Supports parallel expansion up to 3 units for scalable power capacity.
2. Commercial Park Energy Management
Suitable for shopping malls, logistics parks and office compounds. It runs in grid-tied, VPP and multi-parallel modes. Intelligent EMS maximizes PV self-consumption, stabilizes power for air conditioning and critical equipment, and reduces long-term commercial electricity expenditure.
3. Remote Off-Grid Microgrid
Perfect for mining zones, rural industrial bases and areas without stable public grid. Compatible with solar panels and diesel gensets. IP54 wide-temperature cabinet adapts harsh outdoor environments to provide continuous independent power supply with reliable black start capability.
Why Choose Tenz energy?
Green Intelligence · Creating a Zero-Carbon Future
Our Commitment:
We continuously upgrade our core tech to develop integrated all-in-one PV&ESS cabinets with stable output, long battery cycle life
and comprehensive multi-layer safety protection. Perfect for industrial factories, commercial parks and remote off-grid microgrids,
supporting PV matching, peak shaving, blackout backup and diesel generator linkage.
Rich Industry Experience & R&D Capability
As TENZ ENERGY, we deliver robust, compact 50kW/103kWh energy storage solutions to secure stable,
cost-efficient power supply for all your commercial operation demands.
Our factory & quipment
Lorem ipsum dolor sit, amet consectetur adipisicing elit.
Authoritative Global Export Certifications
Core Benefits of Cooperation
As a professional integrated manufacturer of all-in-one PV & energy storage cabinets, TENZ ENERGY delivers tailored
50kW/103kWh industrial energy storage solutions for factories, commercial parks and remote off-grid microgrid projects worldwide.
- High Adaptability
Our 103kWh integrated cabinet supports flexible ODM customization on MPPT channels, diesel generator access, fire suppression systems and EMS operation logic. It features wide environmental adaptability with -20℃~50℃ operating temperature, IP54 dustproof & waterproof enclosure
- Compliance & Peace Of Mind
The whole set of energy storage equipment and internal battery packs pass full UN38.3, MSDS transport certification, matching international shipping and customs clearance requirements. Besides, the cabinet structure, fire protection and electrical design comply with mainstream global ESS safety standards
Get in Touch With Us
We are excited to get to work with you. Please do not hesitate to contact us with any queries.
WhatsApp/Mobile: +8613713871157
Mail: kryssica.wu@tenzenergy.com
Website: www.tenzenergy.com
Guangdong Tianchi New Energy Technology Co.,Ltd.
Hot Tags: 100kwh all‑in‑one lifepo4 bess with grid‑fail emergency backup for bangladesh textile factory solar‑diesel hybrid and epc project bulk supply, China 100kwh all‑in‑one lifepo4 bess with grid‑fail emergency backup for bangladesh textile factory solar‑diesel hybrid and epc project bulk supply manufacturers, suppliers, factory