01 Product Overview
162.78kWh Outdoor Cabinet LiFePO4 ESS With Grid‑Outage Emergency Power For Bangladesh Industrial Site Hybrid Microgrid And EPC Bulk Supply EV Fast Charging
This 162.78kWh container ESS adopts long-life LiFePO4 cells and distributed intelligent BMS, with comprehensive thermal & fire protection, high-efficiency bidirectional PCS and EMS remote monitoring for diversified energy storage applications.
1. Premium Cells & Stable Module Hardware
This 162.78kWh container energy storage system uses 314Ah square aluminum-shell LiFePO4 cells, ≥6000 charge cycles, energy density of 110Wh/kg, working temperature: -20℃~60℃. The 18S module adopts laser welding and air cooling, supporting 314A continuous charge & discharge to maintain stable power output.
2. Layered Distributed Intelligent BMS
The distributed BMS includes BCU main controller and BMU sampling units. It realizes high-precision voltage & temperature monitoring, external MOS passive balancing, TVS anti-static protection and precise SOC/SOH calculation. Isolated CAN & RS485 interfaces connect with PCS and EMS, supporting real-time data monitoring and multi-layer fault protection.
3. Complete Safety & Flexible System Adaptability
Equipped with industrial air cooling and three-mode heptafluoropropane fire suppression. The matching bidirectional PCS achieves 98% high efficiency, supporting grid-tied and off-grid modes. Cooperated with independent EMS, the system applies to commercial peak shaving, PV energy storage and emergency backup power supply.
02 162.78KWh Energy Storage System Scheme
○ Cell solution
Through investigating the products of mainstream manufacturers in the market, a 314Ah square
aluminum case lithium iron phosphate battery is proposed to be used in this project.
The main parameters of the battery cell are shown in the table below
|
Nominal Capacity |
314Ah |
Nominal voltage |
3.2V |
|
Working voltage |
2.5~3.65V |
Working temperature |
-20℃~+60℃ |
|
Storage temperature |
-20℃~+35℃ |
Weight |
5.6kg |
|
Energy density |
110Wh/Kg |
Maximum charging current |
314A |
|
Maximum continuous discharge current |
314A |
Cycle life |
≥6000 times |
○ Overall architecture scheme of energy storage system
The energy storage system consists of a 162.78KWh battery and a main control box.
The topology of the energy storage system is shown in the following figure.
○ Module Scheme
The battery module is composed of 18 square aluminum shell cells with a length of 18S,
and the module's pole lugs are connected by laser welding. Adopting an air-cooled cooling method with the BMU module.
○ Energy storage capacity configuration scheme
|
Number |
Item |
Specification |
Capacity |
Capacity |
| 1 |
Cell |
314Ah,3.2V |
314AH |
2.5-3.65 |
| 2 |
Battery pack |
18S |
18.086KWh |
45V~65.7V |
| 3 |
Battery cluster |
9 packs |
162.78KWh |
405V~591.3V |
| 4 |
Battery stack |
1 clusters |
162.78KWh |
405V~591.3V |
| 5 |
Item |
1 stacks |
162.78KWh |
- |
○ Battery cabinet solution
Outline diagram of battery cabinet (similar projects are for reference only)
Battery cabinet parameters
The performance parameters of the energy storage battery cabinet are shown in the table below
Colour
Industrial gray
Capacity
162.78KWh
Voltage rang
405V~591.3V
○ Primary diagram of energy storage cabinet
○ Energy Storage BMS
01
The energy storage lithium battery system should have a battery management system (BMS). The BMS is designed in accordance with GB/T34131-2017 to realize the overall control and protection of the energy storage battery stack and realize communication with PCS and EMS.
02
The BMS should realize the acquisition of high-precision and high-reliability battery cell voltage and temperature, and at the same time perform high-precision estimation of the state of charge (SOC) of the battery energy storage device, and realize the power balance between battery cells through the balance control circuit. In the event of abnormal battery data, a fault alarm and protection are triggered.
03
The topology configuration of the BMS should match and coordinate with the topology of the PCS and the grouping of batteries, and optimize the control and overall management of the battery operating status. The specific implementation level of each function in the BMS functional requirements is determined by the topology configuration of the BMS, and it should be implemented layered and local. The slave control BMU is responsible for the collection of battery voltage and temperature.
○ The outline drawing of the energy storage converter (PCS) is shown below
03 Main Advantage
Neat Standardized Cabinet Layout
Industrial gray cabinet with integrated 250A air switch and ordered busbar wiring. Classified internal component layout facilitates inspection, wiring and daily maintenance with compact overall dimensions.
High-efficiency External MOS Balancing
Adopts external MOS passive balancing with TVS anti-static protection. It enhances heat dissipation, avoids hot-swap interface damage, boosts balancing efficiency and maintains long-term cell consistency better than built-in MOS designs.
Independent Intelligent Air Cooling System
Custom air duct industrial air conditioner runs 24h continuously with multi-mode operation. It ensures small internal temperature difference, supports RS485 remote monitoring and auto-restart after power recovery without complex piping.
Triple-trigger Fire Suppression System
Built-in heptafluoropropane gas fire device supports automatic, manual and mechanical emergency startup. It targets container electrical fires and forms layered safety protection together with real-time BMS fault warning.
Full-Process Closed-Loop Quality Control
· Real-time recording of data for all procedures
We conduct real-time data logging across every production stage of this integrated PV energy storage cabinet, covering battery cell screening, PACK assembly, high-voltage cabinet commissioning, BMS/EMS debugging and full aging testing. Real-time data capture delivers end-to-end full production traceability, allowing accurate source tracking and targeted resolution of any product quality abnormalities.
· Full Lifecycle Traceable Management
TENZ ENERGY implements closed-loop engineering change management throughout the product lifecycle, standardizing PR, ECR and ECN formal processes. Each 103kWh battery PACK inside the all-in-one cabinet carries unique identification, traceable to original cell batches, component sourcing records and complete factory test reports including thermal cycling, insulation and fire safety inspection archives.
04 Global Certification & Customization
- TENZ Energy is a trusted manufacturer of integrated PV energy storage cabinets for global C&I energy storage projects. Our 50kW/103.68kWh all-in-one energy storage cabinet complies with international electrical & environmental standards. Featuring IP54 protection, -20℃~50℃ wide temperature range and stable operation at altitudes up to 3000m, it suits outdoor deployment in India, the Middle East and other overseas markets. We offer technical support for regional certifications such as BIS, ESMA and local grid connection standards.
- Flexible OEM customization is supported: system capacity, parallel quantity, PV MPPT, diesel generator interface and anti-reflux control can be adjusted freely. We can customize fire suppression systems, communication modules (4G/Ethernet/RS485), cabinet wiring and EMS management strategies. The unit supports grid-tied, off-grid, microgrid and VPP modes, ideal for commercial & industrial backup power, peak load shifting and standalone power supply systems globally.
05 Application Scenarios
Our latest projects
Shanghai Jwell machinery Workshop co-operation projects
1. Factory Peak Shaving & Power Backup
Ideal for manufacturing plants with frequent blackouts and high peak electricity bills. It matches rooftop PV and diesel generators, delivers seamless <20ms off-grid switch, cuts power costs and avoids production shutdowns. Supports parallel expansion up to 3 units for scalable power capacity.
2. Commercial Park Energy Management
Suitable for shopping malls, logistics parks and office compounds. It runs in grid-tied, VPP and multi-parallel modes. Intelligent EMS maximizes PV self-consumption, stabilizes power for air conditioning and critical equipment, and reduces long-term commercial electricity expenditure.
3. Remote Off-Grid Microgrid
Perfect for mining zones, rural industrial bases and areas without stable public grid. Compatible with solar panels and diesel gensets. IP54 wide-temperature cabinet adapts harsh outdoor environments to provide continuous independent power supply with reliable black start capability.
Why Choose Tenz energy?
Green Intelligence · Creating a Zero-Carbon Future
Our Commitment:
We continuously upgrade our core tech to develop integrated all-in-one PV&ESS cabinets with stable output, long battery cycle life
and comprehensive multi-layer safety protection. Perfect for industrial factories, commercial parks and remote off-grid microgrids,
supporting PV matching, peak shaving, blackout backup and diesel generator linkage.
Rich Industry Experience & R&D Capability
As TENZ ENERGY, we deliver robust, compact 50kW/103kWh energy storage solutions to secure stable,
cost-efficient power supply for all your commercial operation demands.
Our factory & quipment
Lorem ipsum dolor sit, amet consectetur adipisicing elit.
Authoritative Global Export Certifications
Core Benefits of Cooperation
As a professional integrated manufacturer of all-in-one PV & energy storage cabinets, TENZ ENERGY delivers tailored
50kW/103kWh industrial energy storage solutions for factories, commercial parks and remote off-grid microgrid projects worldwide.
- High Adaptability
Our 103kWh integrated cabinet supports flexible ODM customization on MPPT channels, diesel generator access, fire suppression systems and EMS operation logic. It features wide environmental adaptability with -20℃~50℃ operating temperature, IP54 dustproof & waterproof enclosure
- Compliance & Peace Of Mind
The whole set of energy storage equipment and internal battery packs pass full UN38.3, MSDS transport certification, matching international shipping and customs clearance requirements. Besides, the cabinet structure, fire protection and electrical design comply with mainstream global ESS safety standards
Get in Touch With Us
We are excited to get to work with you. Please do not hesitate to contact us with any queries.
WhatsApp/Mobile: +8613713871157
Mail: kryssica.wu@tenzenergy.com
Website: www.tenzenergy.com
Guangdong Tianchi New Energy Technology Co.,Ltd.
Hot Tags: 162.78kwh outdoor cabinet lifepo4 ess with grid‑outage emergency power for bangladesh industrial site hybrid microgrid and epc bulk supply ev fast charging, China 162.78kwh outdoor cabinet lifepo4 ess with grid‑outage emergency power for bangladesh industrial site hybrid microgrid and epc bulk supply ev fast charging manufacturers, suppliers, factory