100KWh OEM All in One C&I Energy Solar Plus Storage Solution
video
100KWh OEM All in One C&I Energy Solar Plus Storage Solution

100KWh OEM All in One C&I Energy Solar Plus Storage Solution

This 50kW/103kWh all-in-one PV&ESS cabinet hits high-traffic commercial energy storage keywords for overseas leads
Integrating hybrid inverter, BMS/EMS and full fire suppression.
It supports grid/off-grid/diesel linkage, 3-units parallel expansion, IP54 wide-temperature outdoor design, matching India & Middle East C&I backup, peak shaving and off-grid microgrid hot demand with complete customizable solutions.

01 Product Overview

 
 

 

UltraPower 100 features an All-in-One design,consisting 9 air-cooling battery packs,a 50kW hybrid inverter,a BMS,an EMS,an smart temperature control system,a precision suppression and explosion-proof combined fire protection system,as well as cabinet structure and electrical auxiliary equipment,with a battery rated capacity of 103.68kWh.
 

• Safe: 

Adopt the design concept of very early thermal runaway risk warning,integrating detection, fire suppression,combustible gas detection,smoke exhaust,Linkage protection with BMS and
EMS,targeted fire extinguishing at the cabin level,to ensure the safe operation of energy storage.
 
Intelligent temperature control system, system temperature difference ≤5℃, battery cycle life increased by 12%.
 
 

• Simple

Simple parallel expansion, covering 50kW-300kW wide power range.
 
Overall delivery,factory prefabrication,machine transportation is easy to install and operation.Reducing transportation,installation and commissioning fee by 15%.
 
 
• Smart
 
Support black start function,reliable power supply in off-grid/micro-grid mode.
 
A variety of operation mode options (support virtual power plant,grid-connected,off-grid)which improve revenue.

 

This 50kW/103kWh all-in-one ESS features compact vertical IP54 cabinet with white-gray main body and orange operation panel for high overseas search exposure. Front integrates cooling grilles, touch screen and fire buttons for easy maintenance. Single unit only occupies 1.42㎡, with hidden bottom cables for tidy look. Uniform cabinet size supports parallel stacking, hitting high-traffic C&I solar storage keywords to attract global industrial buyers.►
product-378-800

 

 

 

02 Detailed Parameters

 
 
 

 

○ Mechanical parameters

 

Weight
Net weight 1480kg;
Gross weight 1570kg
Overall dimension
960×1650×2245(W×D×Hmm)
Package size
1030×1720×2400(W×D×Hmm)
Communication mode
RS485,Ethernet,4G

 

 

○ Ac output parameter (generator end)

 

Maximum input apparent power
60kVA
Rated voltage (output)
3L/N/PE; 220/380V;230/400V;240/415V
Rated AC frequency
50/60
Rated charge/discharge current
87A
 
Environmental parameters

 

Operating temperature
-20℃~50℃(>45℃ derate)
Storage temperature
-20℃~45℃
Relative humidity
5~95%RH,No condensation
Altitude
3000m(>2000 derate)
Class of protection
IP54
Voltage total harmonic distortion
4

 

 

○ Off grid with diesel generator.Never power off

 

product-1504-962

 

 

○ Single machine grid connected with diesel generator,the main load is not powered off

 

product-1370-694

 

 
 
○ Product configuration list
 
Number
Item
Quantity
Unit
Remarks
40HQ
1
Battery PACK
9 SET
Single PACK:11.52kWh
2
Cabinet
1 PCS -
3
High voltageTank
1 PCS -
4
Fire protection system
1 SET
Perfluorohexanone
5
Temperature control
system
1 SET
Intelligent air conditioning, intelligent
fan and air duct design
6
hybrid inverter
1 PCS
50kW
7
EMS
1 PCS
Data can be connected to the cloud
platform
8
Auxiliary distribution
1 SET -
9
Cable and others
1 SET -

 

 

○ System Composition
This product is a smart micro grid system that intelligently regulates the distribution of multiplesources and loads.
The overall design is housed in a comprehensive cabinet containing up to 9 battery packs, a high-voltage box, BMS, EMS,
air conditioning system, fire protection system, and one 50 kW PCS.
 

product-1248-850

product-1064-734

 

 
 
Battery PACK
The Battery PACK is composed of 24 cells, each with a capacity of 150Ah, along with one fan, one BMU,
and structural and electrical components for cell support.The PACK integrates a temperature-controlled air duct,
a dedicated channel for combustible gas emission, among other features.
The rated capacity of the battery PACK is 11.52 kWh.
Series and parallel connection
modes
1P24S
Rated capacity
11.52kWh
Rated voltage
76.8V
Maximum charging voltag
86.4V
Charge-discharge rate
≤0.5C
Normal operating temperature
range(charging)
0~50℃
Normal operating temperature
range(discharging)
-20~50℃
Storage temperature range
Storage temperature range
Optimal storage temperature
Rated capacity
25℃
Weight
87.8 ±2kg
Altitude
≤2000m
External dimensions
L*W*H( mm)
857.5±2*428 ±2*176 ±2

product-908-700

 

Hybrid inverter

 

The hybrid inverter used in this product is a three-phase and off-grid energy storage inverter,
which is suitable for the energy management for photovoltaic,battery,power grid.
The electricityfrom the photovoltaic panels is used for load electricity,and excess electricity can be stored in the battery.
When the battery is fully charged, the excess power can be transmitted to the public grid.
When the electricity generated by the photovoltaic is not enough to meet the load demand ofuser, the battery will discharge to the load.
If there is not enough energy stored in the battery, grid will power the load through the system.
The inverter used in this product is an inverter without isolation transformer, and there is no  isolation between DC input and AC output.
 

product-750-1072

 

 

 

03 Unique Advantage

 
 
 
 

 

This 50kW/103kWh all-in-one ESS cabinet integrates PV, genset linkage and multi-layer safety,

supporting parallel expansion, ideal for global industrial energy storage projects.

 

1. Integrated Delivery & Cost Reduction Advantage
 
Adopting full factory prefabricated all-in-one cabinet design, all battery modules, inverters and fire control components are pre-assembled and debugged before shipment. It cuts 15% of overall transportation, on-site installation and commissioning costs compared with split-type energy storage equipment. Single-piece whole-machine transportation avoids scattered component loss, and standardized foundation installation greatly shortens project construction cycle for overseas industrial clients.
 
2. Multi-source Compatibility & Operation Flexibility Advantage
 
Uniquely supports four energy input channels: rooftop PV, municipal grid, diesel generator and battery storage, equipped with 4 independent MPPT tracks to maximize solar energy utilization. It seamlessly switches grid-connected, off-grid, microgrid and virtual power plant modes within 20ms, solving power supply pain points of factories with unstable grid and frequent power outages, and realizing multi-scenario revenue optimization.
 
3. Tiered Full Fire & Thermal Control Safety Advantage
 
It builds dual safety barriers of cabin-level perfluorohexanone fire suppression + early thermal runaway pre-warning system, matched with intelligent air-cooled temperature control to limit internal temperature difference within 5℃ and extend battery cycle life by 12%. The whole cabinet reaches IP54 protection, adapting high altitude, wide temperature and humid outdoor environments, complying with global mainstream energy storage fire and electrical safety standards.
 
4. Scalable Parallel & Intelligent O&M Advantage
 

Supports up to 3 cabinets parallelly expanded from 50kW to 300kW to match different factory power demands. Built-in 4G, Ethernet and RS485 multi-channel communication modules enable remote cloud data monitoring, real-time fault self-alarm and intelligent cell equalization. Modular battery PACK supports independent replacement without full-system shutdown, lowering long-term after-maintenance labor and time costs.

 

 

 

 

 

 

 

Why Choose Tenz energy?

 

Green Intelligence  · Creating a Zero-Carbon Future

 

product-710-122

 

What We Deliver

We keep iterating core technology to launch the 50kW/103kWh integrated PV&ESS cabinet with intelligent air-cooled thermal management

and cabin-grade fire suppression,  delivering steady power output and extended battery cycle lifespan.

Compatible with rooftop PV arrays and diesel gensets, it supports grid-tied, off-grid and VPP modes, perfectly serving factory peak shaving, commercial energy optimization and standalone remote microgrid power backup.

 

 

 

Rich Industry Experience & R&D Capability

 
 
 

 

As TENZ ENERGY, we supply durable, space-efficient 50kW/103kWh integrated energy storage solutions,

securing consistent, low-cost power for your commercial and industrial projects.

 

 

 

product-552-362
Expert R&D Team
product-684-506
20+ Years in Li-battery Industry
product-684-442
Digital PLM R&D System

 

 

 Full-Process Closed-Loop Quality Control

 
 
 
 

 

product-622-460
 
 
· Real-time recording of data for all procedures

We conduct real-time data logging across every production stage of this integrated PV energy storage cabinet, covering battery cell screening, PACK assembly, high-voltage cabinet commissioning, BMS/EMS debugging and full aging testing. Real-time data capture delivers end-to-end full production traceability, allowing accurate source tracking and targeted resolution of any product quality abnormalities.

 

· Full Lifecycle Traceable Management

TENZ ENERGY implements closed-loop engineering change management throughout the product lifecycle, standardizing PR, ECR and ECN formal processes. Each 103kWh battery PACK inside the all-in-one cabinet carries unique identification, traceable to original cell batches, component sourcing records and complete factory test reports including thermal cycling, insulation and fire safety inspection archives.

 

 

 

 

Authoritative Global Export Certifications

 
 

 

 

product-1246-334

product-1244-334

 

 

Core Benefits of Cooperation

 

Flexible Customization & Strong Environmental Adaptability

 

We can tailor the 50kW/103kWh all-in-one cabinet to match local project demands, adjusting MPPT configurations, genset interfaces, fire systems and EMS strategies. With IP54 protection and -20℃~50℃ operating range, the unit reliably runs in diverse harsh outdoor climates across global markets.

product-872-444

Reliable Compliance to Simplify Global Business

 

Complete UN38.3 and MSDS certifications are available for the cabinet and built-in battery packs, streamlining ocean freight and customs clearance. Our electrical and fire safety design conforms to worldwide energy storage norms, and we offer technical support for regional certifications to reduce your market access risks.

product-740-362

 FAQ

1.Is it possible to expand capacity by connecting multiple cabinets?

 

Up to 3 units can be paralleled flexibly, expanding total power from 50kW to 300kW to satisfy growing industrial and commercial power demands.

 

02. How can we monitor the running status of this integrated cabinet?

 

It supports 4G, Ethernet and RS485 communication. Real-time data monitoring, early fault alerts and remote parameter adjustment are accessible via cloud platform.

03. Does the cabinet allow partial maintenance without full system shutdown?

 

Yes. The modular battery PACK design enables individual replacement. Maintenance can be carried out without shutting down the whole energy storage system.

 

04.What safety configurations are adopted to protect the battery system?

 

It is equipped with thermal runaway early warning, cabin-level fluoroketone fire suppression and intelligent balanced thermal control to prevent overheating risks during long-term operation.

 

 

modular-1
Get in Touch With Us

 

We are excited to get to work with you. Please do not hesitate to contact us with any queries.

 

Mail: Leeana.long@tenzenergy.com

Website:  www.tenzenergy.com

 

Shenzhen Tianchi Zhichuang Tech Co, Ltd.

Guangdong Tianchi New Energy Technology Co.,Ltd.

 

 

Hot Tags: 100kwh oem all in one c&i energy solar plus storage solution, China 100kwh oem all in one c&i energy solar plus storage solution manufacturers, suppliers, factory

Send Inquiry