64V 30Ah LiFePO4 Battery for Two Wheeler

Built for demanding two-wheeler duty, this 64V 30Ah LiFePO4 battery stores 1.92kWh in a 16.5 kg aluminum-cased pack, about 116Wh/kg at pack level (calculated). It accepts charging current up to 15A and delivers 30A continuous and 60A peak output. TENZ Energy can tailor the BMS, case and connectors to your platform.

**************************************** 以为产品参数版块 ****************************************

Technical Specifications

supply cost-effective lithium battery solutions

Cell type	LFP	Rated Voltage	64V
Rated Capacity	30Ah	Standard Discharge Current	30A
Minimum Capacity	29Ah	Maximum Discharge Current	60A
Internal resistance	≤50mΩ	Working Ambient Temperature	Charging：0 ～ 60℃ Discharge：-20 ～ 55℃
Pack Method	20S2P	Storage Temperature	3 month: -20 ～ 45 ℃ 6 month: -10 ～ 25 ℃
Weight	16.5 ±0.5kg	Dimensions	329180155mm
Charge limiting voltage	73V	Maximum Charge Current	15A
Standard Charge Current	10A	Discharge Cut-off Voltage	50V

Cell Design: Why 20S2P LiFePO4 Suits Two Wheelers

The pack strings 20 LiFePO4 cells in series to reach the 64V platform voltage, then runs two of those strings in parallel to reach 30Ah. This 20S2P layout is sealed in an aluminum alloy case together with a Smart BMS, wiring and insulation.

Thermal stability. Lithium iron phosphate is known for stable behavior under thermal stress.
Deep-cycle capability. The chemistry suits the repeated charge and discharge of daily riding and delivery routes.
Compact energy. 1.92kWh in an outer volume of about 9.2 litres, or roughly 209Wh/L (calculated from external size).

Product front

Product side

45° side view of the product

Back of product

Compatibility Checklist for Your Two Wheeler

Before fitting this battery to an existing vehicle, confirm five points:

System voltage. The controller must be designed for a 64V-class LiFePO4 pack with a 73V full-charge voltage.
Current. The controller limit should sit within the 30A continuous and 60A peak ratings.
Space. The pack measures 329 × 180 × 155 mm, so leave extra room for cables.
Connectors. Discharge and charge connector types must match, or be specified for customization.
Charger. Use a charger matched to the 73V limit and a charge current of 15A or less.

Not sure about any of these? Send the vehicle model, controller label and photos of the battery compartment, and our engineers will check the fit.

Applications: Where a 64V Two Wheeler Battery Fits

High-power electric scooters and e-mopeds
Delivery and courier two-wheelers
Rental and sharing fleets that need short turnaround between rides
Light electric tricycles
OEM two-wheeler platforms in development

Heavier vehicles or longer duty cycles may call for a larger custom pack; we can size one from your load data.

BMS

Smart BMS and Safety

The BMS watches the pack continuously and steps in when conditions leave the safe window:

Overcharge and over-discharge
Overcurrent and short circuit
Abnormal temperature

Data communication is optional and depends on the BMS version agreed for your project. If your dashboard or fleet system needs battery data, tell us early.

Production and Quality Control

Each pack moves through six checkpoints before it ships:

Cell sorting: matching cells by voltage, capacity and internal resistance.
Spot welding: inspecting joints for strength and consistency.
BMS installation: mounting the board and testing protection functions.
Pack assembly: wiring, insulation, case and outlet connections.
Burn-in and electrical testing: running charge and discharge checks on the finished pack.
Final inspection: verifying BMS function, connectors, size and appearance.

product-710-122

TENZ Energy is a lithium battery pack manufacturer focused on electric two-wheelers and light electric vehicles.

Cell sorting, welding, BMS assembly, aging tests and final inspection run in one production flow,

which keeps configuration, quality and delivery consistent for OEM and ODM customers.

Certifications and Shipping Documents

Battery shipments usually come with paperwork. Buyers of LiFePO4 packs commonly ask for a UN38.3 report, MSDS/SDS, CE and RoHS,

and some also request IEC 62133. Give us your destination market and shipping mode,

and we will confirm which documents apply to this configuration before you order.

product-1246-334

product-1244-334

****************************************** 以下为FAQ版块 *****************************************

FAQ

Q1: Is this 64V 30Ah LiFePO4 battery suitable for my two wheeler?

If your controller supports a 64V-class LiFePO4 pack (73V full charge) and stays within 30A continuous and 60A peak, the electrical match is likely. Space and connectors still need to be checked.

Q2: How fast can it charge?

Standard charging is 10A and the maximum is 15A, which is 0.5C. Actual time depends on your charger, temperature and BMS control.

Q3: What does high energy density mean for this pack?

The pack stores 1.92kWh in a 16.5 kg case, which works out to about 116Wh/kg at pack level (calculated), in an outer volume of roughly 9.2 litres.

Q4: How does LiFePO4 compare with lead-acid for a two wheeler?

LiFePO4 packs are lighter for the same stored energy and suit deep, repeated cycling. Lead-acid can cost less upfront, so the right choice depends on your duty cycle.

Get a Quote for the 64V 30Ah Two Wheeler Battery

Tell us your vehicle model, motor power, controller rating, compartment size, target capacity, connector type, charger, communication needs and expected volume. We will reply with a suitable configuration.

Email：Vicky.w@tenzenergy.com Web：www.tenzenergy.com

Send Inquiry Now

Hot Tags: 64v 30ah ion replacement battery, China 64v 30ah ion replacement battery manufacturers, suppliers, factory